Daystate Single Shot Tray .22

This Daystate Single Shot Tray is the newer version, constructed from synthetic polymer. It fits Daystates newer PCP air rifle models, made post-2019, like the Wolverine-R, Revere and Red Wolf. Generally, it will not fit pre-2019 Daystate PCP models, although some models like the original Wolverine will accept it.

To tell if your rifle will take the newer SST, check its breech bay. If there are two hex bolts in a plate at the base of the loading channel, the new style SST will fit. (These bolts are wider spaced, so the pins of the Legacy SST will therefore not fit.)

The Single Shot Tray simply locates into the breech cutaway in place of the original 10-shot magazine. It is held firmly in place by magnets. The impressed arrow should face forward (but rearwards on the Revere). It can be fitted and removed by hand, and requires no special tools. The advantage of using a SST is that you hand-load the pellet into the breech. This has three advantages.

You can load either from the left or right.
You can visually inspect the pellet before you roll it into the loading bay.
You get a better feel when the feed probe pushes the pellet into the breech.

Some shooters prefer using a SST with their Daystate because of these reasons. Also, some competitions do not allow the use of a magazine-fed rifle.